To Pate-Dawson Co. Goldsboro, North Carolina
c
from
I-95
Take
exit 97 (Smithfield-Selma) and pickup 70 east.
Goldsboro
is approximately 25 miles. When you get to
Goldsboro
there will be two overpasses. Go
underneath the second overpass to the other side and exit to the immediate
right. This will keep you up on the overpass and you will be on 70
by-pass. Go to the first set of traffic lights on the by-pass and make a
left onto
Gateway Dr.
into the
Wayne
Industrial Park
. Take the second left onto
Commerce Court
. Pate-Dawson Co. is last building on right.
from
13 (Newton Grove)
Drive
approximately 20 miles from Newton Grove to the intersection of 13 north and 117
north. Turn left on 13 north and 117 north. Counting the traffic
light at 13 north and 117 north, count to the 6th traffic light. When you
get to the 6th light, get in the right lane and follow 13 north
towards
Kinston
. At the next light, turn left onto
Gateway Dr.
into the
Wayne
Industrial Park
. Take the second left onto
Commerce Court
. Pate-Dawson Co. is last building on right.
from
13 (Greenville
)
Travel
south on 13 until you get to Pinewood intersection. Continue straight
through the traffic light. You will see an overpass beyond Lowes (on
left). Go under overpass and turn left onto 70 east bypass. At next
light turn left onto
Gateway Drive
into the
Wayne
Industrial Park
. Take second left onto
Commerce Court
. Pate-Dawson Co. is last building on right.
from
117 (Wilson
)
Travel
south on 117 for approx. 25 miles. You will go through several small towns
(Freemont, Pikeville,
Belfast
). Once you get to
Goldsboro
continue through first traffic light at which point 117 becomes
Williams Street
. Go under the overpass to the other
side and turn left. You will be on
70 east by-pass. Come down to the
first set of traffic lights on the by-pass and turn left onto
Gateway Drive
into the
Wayne
Industrial Park
. Take second left onto
Commerce Court
. Pate-Dawson Co. is last building on right.
from
70 (Kinston
)
Travel
west on 70 until you get to the second set of traffic lights. Turn right
onto Gateway Dr. into the
Wayne
Industrial Park
. Take second left onto
Commerce Ct.
Pate-Dawson Co. is last building on right.
from
Raleigh
Take
the I-40 east to US 70 east exit (to
Smithfield
-
Goldsboro
). Once in
Goldsboro
follow the 70 east by-pass to first traffic signal (intersection of 70 E bypass
and
Gateway Dr
.) Turn left on
Gateway Dr.
into the
Wayne
Industrial Park
. Take second left onto
Commerce Ct.
Pate-Dawson Co. is last building on right.
from
Wilmington
Take
117 north to
Goldsboro
. Take 70 east by-pass. At the first traffic signal (intersection of
Gateway Dr. and 70 east by-pass). Turn left on
Gateway Drive
Take second left on
Commerce Ct.
Pate-Dawson Co. is last building on right.
